|
| Comments (0) |
|
|
|
My comments will be shown with my name in pink with (Officer of the Love) next to it. This should help make sure you can tell them apart.
|
|
|
As 2012-ascension.com was up for renew, I decided not to renew it and instead I closed the forum. It wasn't used that much and the domain was outdated anyway, but I have the files on my computer so I can put it on this domain if I ever choose to. I just wanted to give you a heads up.
Keywords: close, forum |
| Comments (0) |
|
|
|
My comments will be shown with my name in pink with (Officer of the Love) next to it. This should help make sure you can tell them apart.
|
|
|
Many people have been wondering how to change the firmware on their CG3000D modem so you can get it out of lock down. This is a very popular modem and much like the CG3100D modem as well. I made more progress in this area as it seems that there are a lot of people interested in this, but no one seems to want to build new firmware to unlock the USB host port or other features that companies don't feel like supporting.
Well, now I figured out the means to update the firmware and it can't be locked down by the companies. JTAG (Actually SPI programming in this case) is where you're talking directly to the flash chip and you can erase it and program it. This is programming at the hardware level. No software can stop that.
So, I made a tutorial on how to change the firmware, but the thing is, I haven't yet made the firmware to replace it with. It'll be called NetBeer and its a pun. As NetGear made the unit and they open sourced their firmware, its licensed under the GNU GPL. (Gnu software is free as in free beer. NOTE: I just went to their site and they apparently now want it thought of as "Free speech" instead of as "Free beer" like they used to say.) Anyway, that's the pun. NetBeer will also be open sourced under the GNU GPL.
I'm looking for programmers who want to help develop the NetBeer software. Now that I finished procuring the means to get the software loaded onto the unit, the next stage is to create a successful compile of the NetGear release. Here's the link to the page for the firmware I'm basing NetBeer off of.
http://kb.netgear.com/app/answers/detail/a_id/…gpl-open-source-code-for-programmers
NetBeer will be to the CG3000D, as DD-WRT is to routers. It should be a sight to "beer-hold!" After we create a successful NetGear build and successfully JTAG it onto the unit, the next step is building NetBeer and JTAGing that on. When its finished, I'll create a forum for NetBeer and people can get help with the software, learn how to add it to their modems.
If they can't do it their self, they can hire myself and anyone else who's interested, to add it to their modem. They'll need to mail a form with it stating that they will not hold the technician accountable for any damages from adding the firmware to their modems. Plus, we'll sell modems with NetBeer preloaded onto them. Get them from the website or from eBay. Anyone can sell them as long as they say they aren't affiliated with the NetBeer programmers if they aren't. NetBeer programmers can show that they are part of the team to add credibility to their sale.
OK, so now for the fun part...
TUTORIAL
After months of hard work and spending over $100 to try different things, I learned how to JTAG my CG3000D.
I'll show you how so you don't have to fumble around in the dark like I was.
CREDITS:
1.) Myself (Na'ven)
2.) USBBDM from usbjtag.com (He helped me figure out how to set up the wiring.)
3.) CAPONE from usbjtag.com (He gave me advice and things to try.)
TECHNICAL NOTES:
1.) The CG3000D uses SPI Flash, So, its a SPI core, not MIPS EJTAG as I originally thought.
REQUIRED EQUIPMENT:
1.) Soldering iron and solder (Get one on eBay or at Radio Shack. Weller is a popular brand.)
2.) USB JTAG NT (Buy that at http://usbjtag.com/zenshop/index.php/…ducts_id=9)
3.) Wire (I used a 14 conductor (wire) ribbon cable)
4.) Multimeter (Optional, but HIGHLY reccomended)
5.) The CG3000D or the CG3100D
6.) A USB type A to USB type B adapter cable. USB JTAG NT doesn't come with a USB cable.
NOTE: USB JTAG NT comes with a header and as well as its own software. (Included in the archive) We'll be using those in this tutorial.
WIRING IT UP:
1.) Open this page: http://www.usbjtag.com/jtagnt/modem/CG3100D.php
2.) On the page above, you'll see that its for the CG3100D. That model is much like the CG3000D and it uses the same chips, so we'll be using that tutorial. In case the page ever gets removed, I added a backup of that page in the the archive for this tutorial.
3.) Begin soldering wires to the pins shown on the page above. Notice that there are 2 chips at play here. The one listed as having an ISP pin is in the same place on the CG3000D as it is on the pictures on that page. There are two chips circled in red. Notice that the flash chip is
4.) Once you finish soldering all the wires to the board and preferably have checked that they don't bridge with any other pins or components, you can solder the olter ends of the wires to the appropriate pins on the header that came with your USB JTAG NT. Take note of the position of pin 1 on the header. When you connect the header to USB JTAG NT, look for the arrow on its connector. The arrow on the connector will show you where pin 1 is.
I included the numbered pinout for USB JTAG NT in the archive as well. Be sure to solder the wires to the short leads on the header.
5.) Unplug your modem from its power.
6.) Connect USB JTAG NT to the header you just soldered all your wires to, making sure that you have pin 1 in the right place. (If you did what I did and used two connectors connected by a header, you'll need to make sure that you twist the wires in twos before adding the connector to your modem's ribbon cable. That way you can line up pin 1 (red wire) on both headers and connect them without the rows being reversed. See the pictures for a picture of what I mean.)
7.) Connect the USB cable to USB JTAG NT and then to your computer.
SOFTWARE
1.) Install the drivers included in the archive if windows doesn't automatically install them.
2.) Install the USB JTAG NT software from this archive.
3.) Run Start -> All Programs -> usbjtag -> UJmodem
4.) Click the "system" tab and you'll see the activation screen. Your hardware ID should be showing. Type in your email address from when you ordered your USB JTAG NT and send an email to the email address you were sent to get your activation code. Include the hardware ID shown on that screen. When you recieve your activation code, type that into the activation code box on that screen. Select the target as anything you'd like. We're just activating it for now. After that, click OK and close that program.
5.) Run Start -> All Programs -> usbjtag -> USBJTAG NT
6.) Change the category and change it back to "Modem" and then select the "SPIFLASH" protocol. Select CG3100DSPI under target select. Check "Register view" and click OK.
7.) Now you should see the main program. Click the button at the top that says "ID" and it should detect your flash properly. Below is an example of a proper flash detect.
-flshdct 0
Found Address= 00000000 25FL064A
Below is an example of an improper flash detect.
-flshdct 0
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 00,00,00
8.) When you have a proper flash detect, you need to click the "AllFlash" tab and then click the button to the right of the "ID" button you just hit. It should say "R" and have an arrow pointing right. Click it and it will read everything from your chip. It'll take a few seconds and show a progress bar before spilling its contents to the screen.
9.) Now you'll want to backup your chip, so click save and save it as something like CG3000D_Original.bin
10.) Verify that there's actually data in that file. This way you know for a fact that its a good backup. To do that, install HxD (Included in the archive) and open it. In HxD, open the bin file you just saved. If it has FF FF FF all over the entire page, or 00 00 00, then you'll need to back it up again before erasing your chip. If it has FF FF FF in only some places, but it has many other values as well, then you're good to go. When you have a proper backup, move on to the next step.
11.) I can't include a copy of my firmware as it has my MAC address in it, so you'll want to write the firmware you just backed up, to the modem instead. Open the file you just saved as your backup. Click the "W" button that has an arrow pointing left. That will start the write process.
12.) When it finishes writing, diconnect the power to the modem, then the USB cable from the computer, and then disconnect the JTAG connection. Do it in that order so you don't risk damaging your modem. Connect the power to the modem and see if you can go online. If you can, then you're good to go and you finished this tutorial.
FIRMWARE PROGRAMMING
People have been looking for firmware for this unit to enable that USB feature and I still plan on making NetBeer, my own custom firmware for this modem. It'll stop network pushed firmware, allow you to have console access, and also have the USB Host finally activated at long last. I'll change the interface to look better and I'll only add features, not take them away. Plus, you'll have SSH, Telnet, and Serial port access again in case you want to use those instead. If you'd like to help me build it, please let me know. You'll need to have completed this tutorial, though.
DOWNLOAD TUTORIAL: http://thelifemaster.com/Main/uploads/CG3000D-JTAG.zip
Keywords: CG3000D, USB JTAG NT, firmware, tutorial |
| Comments (4) |
Show/Hide Comments |
|
My comments will be shown with my name in pink with (Officer of the Love) next to it. This should help make sure you can tell them apart.
Author: Jeff
Posted on: 10/26/2012 at 04:28 pm
|
I have firmware 5.5.4 and I noticed some strange things with this modem I was curious if you have got past. I am not able to get over 144mbps when the my intel n chipset laptops are right by the modem. I am getting 100mpbs on ports not 1000. The wireless radio drops randomly at times. Could be a defective unit or product line but the firmware seams buggy by some of the behaviors I have seen. Also dropping more packets than I would like (0). :) Not sure if you have got any of this stuff going on yours. Curious or if the new firmware has been built. |
Author: MotoManiac
Posted on: 12/14/2012 at 07:41 am
|
Hi, did you come with solution for USB? My cg3100 now works perfectly, but I really miss external hard on USB!!! Is there a way to enable it? put firmware from cg3100d-2 maybe? |
Author: Na'ven (Officer of the Love)
Posted on: 12/14/2012 at 01:52 pm
|
You could try. Just make sure you keep a JTAG backup of the working unit. I couldn't get it to activate even with the console. You might want to keep working with it, though. I'm not sure if the firmware supports the USB, so that's why I tried to make new firmware.
As for the 100Mbps bit, your ethernet adapter only supports 10/100 Mbps. That's the standard for most ethernet adapters. |
Author: Jules
Posted on: 05/07/2013 at 05:30 pm
|
Do I have to use only a usbjtag nt or can I use a usbjtag? Can another jtag unit? |
|
|
|
Here's a nice post and part of my reply to it on what you need to do to ascend.
|
|
Now that we are nearing the end of 2012 (supposedly the year of ascension), this is an extremely important question that we have to ask to ourselves.
Many people interested in the subject of Dimensional Ascension believe that the vast majority of mankind will ascend into the 5th dimension soon after 2012. They believe they are ready because they have fulfilled the requirements, which is mostly based on “51% of service to others”, according to several texts. Some others say that only true intention is necessary to graduate.
But then, is it really true that only that is required to move up? I wonder what about the souls who knew about ascension more than 10 thousand years ago? What about those who were already giving great service to others each lifetime for more than 10 thousand years? Were they trapped in the 3D Earth having to wait thousands and thousand of years until this present year? So they couldn't ascend because of the “timing” thing? But wait! According to many enlighten beings, time is an illusion, right? So then, how come does the timing matters so much, up to be point of not giving the souls a chance to ascend when they are ready, or when they really want to go up?
This is not fair at all for those souls; this just doesn't make sense.
This matter only leads to two logical answers:
1- The “intention” and the “51% service to others” theories are incomplete or wrong, and there are more requirements for the dimensional ascension to take place.
2- Time is real, not an illusion, and it does matter to know when is the “right time”.
However, on the other hand there are several texts explaining the reason spirits incarnate on Earth again and again: because there are many teachings that souls need to finish learning, or because souls agree on guiding others to become more perfect. These texts do not talk about ascension and a specific time; they just say that once we have fulfilled all the objectives in the physical world, we as spirits don't need to incarnate again, and we start doing other works in the ethereal realm.
Earth is a school and it functions the same way a normal educational institution does, in the way that > if you did not learned certain lessons you were supposed to get, then you simply repeat them again and again until you get them <, the same way you repeat a grade in an Earth school.
Therefore, > how can you expect to graduate if you did not learn the lessons? <
It is time for us to descend from the clouds and see the real world in front of us. We have to be honest to ourselves. We have to recognize and know if we have learned our lessons in life. I personally haven't done my homework well. So is the same to many beings on Earth at this present moment. I see so many people who did not overcome even the basic teachings, even those people who claim to be spiritually enlighten, and they prefer to delude themselves on promises of dimensional ascension.
Some of the common lessons for souls on Earth are:
How to control hate, anger and fear
How to manage and end addictions and bad habits
How to avoid getting trapped in the material pleasures
How to be self sufficient and stop blaming the others
How to be respectful and acknowledge the others the way they are, as spiritually evolving beings
How to truly understand and forgive others (and one's self too)
How to be patient with others and one's self
How to share, be truly generous and help others
How to lose, give up, let go and accept losses
How to be open minded, also analytical and embrace old and new ideas
How to have enough courage and strength to overcome difficult situations
How to know when an important life lesson is taking place
How to recognize and trust the guiding inner voice
How to understand and put in practice the real unconditional love
And there are many more lessons of course, at a personal and human race level that need to be mastered.
I hope this message gives you a new light to work with.
Sincerely, from another spirit of the Source, just like you.
Source: http://lightworkers.org/forum/163900/am-i-really-ready-ascend-higher-dimensions
|
|
|
Nice post. I like that. When I tell people about how ascension works, I tell people that to ascend you need to clear your karma and to learn to be of unconditional love and compassion. My last major lesson is to stop yelling at things and Gate Lion actually halved that lesson for me by draining off the negative energy that was stirred up by the planetary alignments helping me to express much more of that. It came to the surface and Gate Lion's negative (perceived or otherwise) post, helped me pitch it.
I recently learned to accept that everyone has their own reality and that their reality might not include ascension. It was a tough lesson that I started learning a few months ago from the ass kicking BlackIshtar gave me on YouTube. lol I finished learning it a month ago and am now finishing out the ripples of tense energy it left behind at some points.
Keywords: unconditional love, karma, negativity |
| Comments (0) |
|
|
|
My comments will be shown with my name in pink with (Officer of the Love) next to it. This should help make sure you can tell them apart.
|
|
|
Hey, my friend made a post showing these videos contain the evidence of what the Illuminazis are doing. This should help more people to awaken.
|
|
You can skip forward to 2:00 min in, in order to get to the part about “libor”, that is when the story begins.
Part 1: http://thedailyshow.com/watch/wed-july-18-2012/…international-banking-actuality-part-37
Part 2: http://thedailyshow.com/watch/wed-july-18-2012/…international-banking-actuality-part-37---libor-fallout
Just as all of the channeling have said it would be~ Here it is! Isn't it entirely obvious how that Ascension is under way? The arrests and exposing their crimes like this is the very first step to getting the proverbial light ball rolling here! I’ve always loved Jon Stewart to death! He’s a true lightworker and great friend to the people!~ A highly intelligent master of summation when it comes to all of the corruption involving politics in our world, and he always delivers it in a witty and entertaining way. If you want to watch the fireworks display that is the dark cabal and Illuminati going up in flames, I suggest watching his show to easily keep up to date on things and learning them about them in a lighthearted, non-aggressive and fun way! It’s quite fun to watch him metaphorically poke his stick at Mitt Romney as he ignorantly flails about in this world like a fish not receiving the proper amount of darkness he was once used to. The light is growing stronger and stronger, and it clearly shows and is evident at how very desperate and blatantly stupid those dark entities are now appearing in the public eye. They are making mistake after mistake, they are backed into a corner, they are being repeatedly exposed for what they are, and this video and all of its original sources seems to me like the very first HUGE domino that will being flood our main stream media like a wave illumination upon all that dark cabal’s going-ons and wrong doings.
I just LOVE at the end how he jokes quickly around at them being the Illuminati at the end of part 1! Subtly implanting that truth in the masses perhaps to make it less harsh when more of all of this comes to light? Two of the people in charge: Mr. Rich Ricci and Mr. Diamond…… Obviously these people are two puppets controlled by the those true dark entities behind the scenes controlling everything, and the sheer arrogance and irony in their choice of names is as if they were purposely flaunting the whole situation in our faces. It is if a poorly written day time drama or cheesy work of fiction! And another part that is mentioned: finding about libor is like finding out that “the whole world is built on quicksand.” And that couldn’t be more true…
The structure that the dark forces have poorly conceived and set up is falling apart at the seams and is begging to be exposed in its entirety; that should be blatantly obvious after seen these two short little clips here. Now all you light workers stay hopeful, focus your wills, and hold on for the ride~ Because it’s going to an awesome, liberating journey into all things loving and lightful!
Source: http://lightworkers.org/forum/163711/illuminati-crimes-are-now-being-reported-mainstream-media
|
|
|
Keywords: illimunazis, illuminati, mainstream media, daily show, banking, fraud |
| Comments (0) |
|
|
|
My comments will be shown with my name in pink with (Officer of the Love) next to it. This should help make sure you can tell them apart.
|
|
|
|
|
