I keep having to really dig for some information that a lot of people might find useful. So, whenever I have to dig for something that should be more obvious online, I'll post that information here. It'll just be random stuff that I find.
FedEx Office Integrator ID:
To get a FedEx Office Integrator ID, you need to go to the link below.
Save a copy of the Developer Test Key Enablement Request Form available (here).
You'll need to email them the form on that page in order to certify that you understand that the ID will become a production key and that you'll be billed for the services rendered.
UPDATE: Apparently that's not how to get it, but you do get access to printing live shipping labels that way. You'll eventually be asked for a Fed-Ex Ground Shipping Account Number in the cover letter when they reply to your request. Apparently it isn't needed, so just put "Unknown" or the like in there. I couldn't figure out where to get one, but I had the rest of the info including my account number that I found when I logged in and viewed my profile.
Q.) Is a DUNS number public information?
A.) Yes, a DUNS number is public information as you can go to the DNB and search for the company's name, then enter your full name and email address and out pops their DUNS number.
This will allow you to print labels from USPS, but the labels won't be paid for. You'll need to use either a postage meter (Expensive) or you need to pay at the post office. Places like PayPal, EasyPost, etc. who have an API to print the labels with payment paid, are acting like a postage meter and are partnered with the USPS to do that. Below are a couple links to get started as a partner with the USPS.
The former I'd imagine will be more useful to you.
Q.) My 852D+'s hot air gun isn't turning on. Why? Is it broken?
A.) The unit tuns off the hot air gun automatically when it gets set in the cradle. (Magnet switch?) This is to a safety feature and it's documented in the user manual. The user manual is a bit of a rough translation to English as someone who speaks English as a second language wrote it, so I just wanted to clarify that a bit on here for anyone searching for that information.
I found this video and I plan on making use of this concept to build a much larger generator. When I finish making it, I'll post what I did, but the larger motors will run me $123 total, so I'm not sure when I'll get it done. I plan on using 3 pairs of AC motors in series in order to pool their output voltage. I'll just step the voltage down at the end in order to make it usable for outlets and such. This will in turn up the allotted current and make it a viable house generator.
So, how do you get "free electricity?" Well, you don't make electricity from nothing and motors do use energy to run, so it's not like you can use a motor to endlessly power another motor. You need something to continue supplying power. What do we know of that supplies endless energy due to the nature of the energy it supplies? Magnets. More specifically, permanent magnets. They stop supplying their energy, but it takes a TON of work to do that to them. At high temperatures (or in this case, high temperatures and conversion to electricity) they will loose their magnetic energy.
OK, so now we know that magnets have a substantial source of energy that can be harnessed for electricity. So, how do we harness that power? By using a coil (A coil is is a coil of wire and is a form of an inductor) we set the magnet nearby and the coil will draw the magnetism from the magnet slowly due to the nature of an inductor. (It acts like a magnet when it's charged up.)
If you add that coil to the motor setup, you're in fact feeling the magnetic energy (converted to electricity) into the electricity being produced by the output motor. Those two combined together can power both the drive motor turning the generator motor and due to the magnet, it will have enough power left over for other loads. (Things you plug into the circuit.)
So, now, let me show you the video on how it all works in this guy's proof of concept video.
Here are the motors I'll be using when I can afford them.
As I'm a scientist, I like to make sure my theory is correct before investing in materials for a project, so if you know of any further information that can be used in my project, please post a comment or send me an email. I'd especially be interested if you know what a good amount of neodymium would be or if you know of a more efficient type of magnet that can supply more energy and stay low priced. Neodymium has a large amount of energy in a smaller footprint. That's what makes them unique.
1.) I want to know what happens if we catch the magnetism from the motor coils with another coil and attach that coil to the magnet supplying the energy. Could we also catch the heat output to cycle that back through? Would those both catch the energy dissipated and extend the generator's life exponentially leaving only the drop of energy used in mechanical consumption?
The Illuminazis are the Illuminati. And HELL NO they aren't working for the good of mankind. They've enslaved humanity. Their symbol is on all their currency, yes.
Want to know who the Illuminati really are? Let me show you the hierarchy first.
1.) Common people like you an I
2.) The government
3.) The Illuminati, The Knights Templar, and The dragon
4.) The Annunaki races
The Annunaki races consist of the Draconians, iguanoids, and other reptilian races. The history of mankind has many theories and all of them involve how the reptilians came to power. I still have yet to figure out which, if any, are correct.
One of theories that shows the nature of the reptilians the best is this. When the Earth was still formable (not 3D) the humans here were not in these bodies. The reptilian home world was running dry of gold and Anu, one of their leaders, was trying to make its o he would live forever. (Why anyone would want that is beyond me.) Annunaki means The Avengers of Anu by the way.
So, Anu had some people come to Earth to ask the people here if they could bring their planet to Earth and mine for gold here. The humans considered it and eventually they allowed Anu and his people to do so. After a while, they got tired of mining for gold all day and night, so they created these bodies to mine gold. They asked the people of Earth if they would be willing to test them out for them and they agreed to.
After a while, the Annunaki had what they came for, but they decided not to leave. Instead of leaving, they captured many people from all over the galaxy and put them into these bodies and eventually made the bodies capable of reproducing. (Creating more bodies so they didn't have to make them.) They would catch their own souls when they left the womb.
Anu started caring about the bodies he made and tried speaking with the people. The other reptilians didn't like that and shut him up. The God in the Christian bible is really Anu. This is why "God" stopped talking to the people later in the bible. The bible is the biggest single hoax on the planet. Religion in itself is meant to be a way for people to learn and grow together and evolve their knowledge, but religion as we know it is stagnant and unchanging. This makes it easy for them to control you.
The bible even talks of demons and angels. Did you notice how much the Draconians and other reptilians look like the storybook demons? That's because that's who they saw when they drew those pictures. Angels were based on light beings and the halo is part of the aura. The wings were light misinterpreted as wings and it comes out of their back.
Today, people don't remember their history or what freedom truly is. The Annunaki created the Earth based organizations (Illuminati, Knights Templar, and The Dragon) to carry out their wet work for them on the Earth and other deeds.
Those groups created the money system in ancient Egypt and allowed the Pharaohs to create just how much freedom their people have by giving them only a certain amount of money. If you don't have money, you can't buy food, shelter, clothing, luxuries, or anything else. You simply have your body and nothing else. This makes it so your existence is controlled and therefore you cannot truly be free unless you have unlimited funds.
People have lost their ability to survive adequately in the wild and therefore they cannot live off the land for the most part. Even if you try to live off the land, much of the land (all?) is controlled by them anyway and you'd need to buy it from them and pay taxes on it. You could build on it with a building permit and farm on it. I think farming the land would involve being taxed too, but I'm not sure.
What goes on behind he scenes? Research Monarch and MK-Ultra mind control. Even the organizations have slaves doing their wet work and other deeds. They take away abused children and tell the parents that they will expose the parents as child predators if they don't let them take them. They also have slaves from their own families.
If you abuse the children enough, it will cause them to dissociate and thus it gives them the ability to program certain parts of the child's mind while keeping other parts of it ignorant. (The perfect Dr. Jeckle/Mr. Hyde on control) They use keywords to change the person's personality and only the handlers know the keywords as they're differ from slave to slave.
One torture method they use is they put children in cages that they can push a button and make the metal cage electrocute them until they get the response they want from them. Sometimes they do it just to show the child that they can. There are things they show the children, like Disney movies. When the child grows up and sees something like Micky Mouse, the personality changes and keeps them under their control.
It's not just the mind controlled slaves being programmed. They program you as well. Do you feel truly free in this world? You don't even remember true freedom and most people would think true freedom sounds like a fairy tale. Think of a world without money where everyone loves each other and you can create anything you want when you want it. Sound too good to be true? Well, that's just a short description of how life used to be before they took over the world.
Oh, and they make it so you never know the truth as it'll expose them. They ridicule anything that can expose them. If it's grown too big for them to discredit the thing they don't want known, then they take over the operation and make it so that it fails or no longer works. This way they control that too.
They often will give you all the details of what they wish to hide, but change critical factors. For example, they will have someone dress up as batman and go to a movie and kill people there. They tell you all about it, but they don't tell you that it was a mind slave that they used to kill people who they didn't want around.
This is just some of what they do. Why do they do that kind of stuff? They keep people under their control. They have whatever they want whenever they want it. They enjoy doing this kind of stuff.
So, how do you stop something like this? Expose them! Now, if enough people start exposing things about them over time, they will change things about how they do things or they will add misinformation to the mix so people can't tell what's true and what's false. Listen with your heart and never automatically accept or deny anything. (Including this message) Some people don't even know that they have the wrong information.
If people start thinking for their selves and wake up, then people will eventually understand the truth they need to know about the elitists and the elitists will fall. Once exposed, people will seek them out wherever they may hide. All of them must go away. (No killing them might not be the solution. Besides, they need karma. Probably the best method would have them be the ones who are enslaved for a while so they know how it feels. Maybe have them be grunts doing jobs no one else wants to do? Once the mess is cleaned up and people become more refined, them they will stop the enslavement of their species and they'll have their karma finished. However, karma should be done by karma, not by people just saying, "Let's do this to them.")
To expose them, people need to be awakened so that they start to be in the know. When enough people know, they will talk and the dark ones will mess up and get caught. Those mess ups will cause more people to be in the know and when you wield the media as a weapon and have a mess up in front of the masses, you're screwed if you leak the wrong information. I wonder if Wikileaks is ran by them and they propagated it through the news so that people would look at the site and be filled with misinformation. Question everything and don't be mislead.
The purpose of us lightworkers is to shine the light on the dark ones so that people will know the truth. We are the only "secret organization" who does that that I know of. We aren't truly a secret organization, but the way we aren't officially organized and the way that we operate with a common goal at heart, resembles one. Anyone can be a lightworker and the more lightworkers we have helping to open people's minds and hearts, the faster this mission will be completed and the dark ones will be exposed. There are humans and other kin alike in this world and all can be a lightworker.
To perform chakra balancing, lay down and get comfortable. Close your eyes. Following are how to balance your chakras. When you picture the energy swirling, you're balancing the chakra as the energy needs to be moving and not black and stagnant.
1.) Below and between your feet, picture a swirling clear energy. This is your Earth star chakra.
2.) After it feels healthy, move up to your genital area and picture a swirling red energy. This is your root chakra. Feel its energy and when it feels healthy, move on.
3.) Picture an orange swirling energy near your naval (belly button) area. Feel its energy. This is your solar plexus chakra. When it feels healthy, move on.
4.) Go up to just below your chest and picture a swirling yellow ball of energy. That's your aspirational solar plexus chakra. When it feels healthy, move on.
5.) Move up to your heart area and picture a green ball of swirling energy. This is your heart chakra. Feel its energy and when it feels healthy, move on.
6.) Move up to your throat and picture a blue ball of swirling energy. This is your throat chakra. When it feels healthy, move on.
7.) Move up to your forehead between your eyes and picture an indigo (pinkish purple) ball of energy swirling there. This is your third eye chakra and when it feels healthy, move on.
8.) Move up to the top of your head and picture a swirling violet ball of energy. This is your crown chakra. When it feels healthy, move on.
9.) Move about a foot above your head and picture a rainbow colored chakra. This is your ascension chakra. When it feels healthy, picture it feeding its energy to the rest of your body. It will help you with your ascension. When you're ready, move on.
10.) Move a bit higher into outer space and feel a clear swirling energy. This is your soul star chakra. Feel its energy and when it feels healthy, move on.
11.) Move a little higher and feel your Galactic chakra. This chakra keeps you at one with the galaxy. Feel its clear swirling energy and when it feels healthy, move on.
12.) Move a little higher still and feel another clear swirling energy. This is your stellar gateway chakra. Its a portal to cosmic energy. When it feels healthy, you've balanced your 12 chakra system.
13.) Feel a pillar of white light come through your 12th chakra and flow your your body and down to Earth.
14.) Feel Earth energy come up from the Earth and go through you to your 12th chakra.
NOTE: The exact placement of where you focus on your chakras doesn't matter that much. Focusing on balancing their energies is what helps. Also, the last 2 chakras I couldn't find an exact name for them, but I know what they do, so I put what felt right. The name of them isn't important, just what they do and that they're balanced.
UPDATE: OK so I guess this method doesn't work. If you want to give it a shot, feel free. Also, I did wuite a lot of work on this, so if you want my work from playing with the firmware, let me know. The rest of the article is from when I first wrote it thinking it would work.
OK, well after months of hard work, I decided the best way to make NetBeer is really just modifying some settings and spitting out flash images. lol NetBeer is now just a fancy word for the stock firmware that allows Serial, SSH, and Telnet access, but will never check for firmware updates. This means that you have complete access to your modem except for the elusive USB host port that doesn't ever seem to have firmware that supports it. It has its driver and MAC address, but it doesn't work even with that. You'll never loose any console access unless you change it back to allow firmware updates. It'll work on any cable provider's system as this is the stock firmware that comes with the unit. (Hence, stock, as it comes with the unit, it's stock. lol OK, I just felt like making that sentence even more redundant. )
Now, on with the show. Below is the tutorial on how to get it on your unit and attached is the archive with the image and software that you'll need. The project requires you to buy a USB JTAG NT device, though.
On a side note, your cfg image is where your mac addresses, serial number, and root cable certificate are stored. Keep your cfg partition in tact.
In order to install this firmware, you'll need to buy a USB JTAG NT adapter and be comfortable soldering to your modem's board.
If you can't do this or ather have me do it, I will install the firmware for you for a service fee and I'll also need the return
shipping costs as well as a waiver stating that I'm not liable for any damages. I accept paypal for payment, or you can send a money
order for the correct amount agreed upon after discussing this with me. I need to solder a connector to your board to install it
and that takes about 20-30 minutes as they're small peices.
2.) Now we need to install the CG3000D XML file. The USB JTAG NT software is included in this archive, but requires
registration with http://www.usbjtag.com and you get thefree registration info after you buy the required hardware. Install
that software and open the program files directory for usbjtagnt. Open the config directory in there and copy the XML file
to that directory.
3.) After you install your USB JTAG NT properly and have the unit connected to the board, open the software and on the config
screen, select Modem -> SPIFLASH -> CG3000DSPI and click OK. Click the ID button on your software to detect the chip. It
should say the following in the Output tab.
Found Address= 00000000 25FL064A
If not, check the wires. See the tutorial above for more help or contact me.
4.) Now go to the AllFlash tab and click the read button that's next to the button that says ID. It should read all the data
from the chip, onto your screen. Be sure to back up the data from each tab. (You really only need the AllFlash tab backed up,
but it makes it more convienient to have a copy of each section of the ROM.)
5.) Keep the read data in the software and then switch to the Image0 tab. In the left pane of the software is a way to browse
for another directory. Browse for the directory with the Image1.bin file in it from this archive. Now in the lower part of the
pane, you'll see Image1.bin. Double click that and it will fill the Image0.bin with the contents of that file.
6.) Switch to the Image1 tab and double click Image1.bin to fill Image1 with that data as well. This makes both images the same.
7.) Go to the AllFlash tab and click the write button at the top. Write the data to the chip and then when it says "Program pass"
at the bottom, you can unplug the modem, then the USB cable from the computer, then disconnect the USB JTAG NT device from the modem.
8.) Plug your modem back in and while its booting up, install PuTTY and run it. Click the SSH radio button for the connection type
and enter 192.168.0.1 for the Host Name/IP. Make sure its at port 22 and then type a name in "Saved Sessions" and then click "Save."
9.) Before opening the SSH console, you'll need to go to 192.168.0.1 and log in as user MSO with password changeme. Go to the "Remote
management" tab on the side and make sure that "through LAN interface" is checked under the Telnet and SSH options at the bottom.
10.) Now open PuTTY and double click your saved session. It will open a console window. Enter MSO for the user and changeme for the
pass. You'll see the prompt show up. Type the following commands.
The default is 4 for max_dload_tries, but setting it to 0 will disable it from getting firmware updates that lock your modem down. You
can copy and pase the lines above. Just copy 3 lines including the blank line after max_dload_tries 0 and it will automatically execute
that for you. I don't think you need to reboot, but now you have permanant SSH, Telnet, and Serial port access. The USB Hub I couldn't
get to work. Sorry.